0
dear friends I have a dreambox 800hd pvr that with (-> error! look at * erro1 foud in ca), I tried several programs NCF SIM2 v2.5, DreamBox OptiFlasher-Pro-v1.0.9-E2-b with the serial dreamup simcard2.01 and not resolved. I thank the help
|
Thread Rating:
Title: dreambox erro1 no ca foud (DM800-Sim 201)
Thread Modes |
04-29-2012, 12:34 PM
0
In attachment last bootloader for sim201 SSl84b..
1.download file and extract it.
2.Use optiflasher here
3. Flash SSL84b by optiflasher with null modem cable only see this replay
4.Unplug box and plug it again and see what happen..if booting it's fine if not try to flash this image
Let we know about your result...
1.download file and extract it.
2.Use optiflasher here
3. Flash SSL84b by optiflasher with null modem cable only see this replay
4.Unplug box and plug it again and see what happen..if booting it's fine if not try to flash this image
Let we know about your result...
04-29-2012, 01:55 PM
04-29-2012, 02:44 PM
0
I downloaded the program but not the registered communication with dreambox
not notice the error was wondering if a video posivel making reparation in DREAMBOX
not notice the error was wondering if a video posivel making reparation in DREAMBOX
0
Not clear for me ...did you mean the optiflasher does not connected with box? as i mentioned before try with null cable without network lan.
05-23-2012, 05:52 AM
(This post was last modified: 05-23-2012, 06:09 AM by luiscarlosalves.)
0
My dear friend fairbird dm 800hd pvr CLONE was having a dream image ramiMAHER elite v14-82-ssl 2.01.nfi there was an exchange for another image open sim pli ssl 2.01 and 82's when rebooted the dm gave an error found in ca al this is not to start with anything that was said to you friend
already used 1.3.0.2 debug with repair was tested with cable and cable SEPARATE null null cable and network together
no communication of any IT DOES NOT START already retired and exchanged the card but only 2.01 and nothing appears on screen in ca found an ERROR
would you make a video and send me the link as a friend to do for my dreambox 800hd back to life again and it has many dreamboxs 800hd with the same problems that I have seen here in the forum dreambox all have this same problem of not booting and ip not appear using all the features of the forum here I thank you
already used 1.3.0.2 debug with repair was tested with cable and cable SEPARATE null null cable and network together
no communication of any IT DOES NOT START already retired and exchanged the card but only 2.01 and nothing appears on screen in ca found an ERROR
would you make a video and send me the link as a friend to do for my dreambox 800hd back to life again and it has many dreamboxs 800hd with the same problems that I have seen here in the forum dreambox all have this same problem of not booting and ip not appear using all the features of the forum here I thank you
05-23-2012, 04:12 PM
0
@luiscarlosalves
Please make new topic and put full details for your problems and also see this topic..
Please make new topic and put full details for your problems and also see this topic..
06-12-2012, 04:29 PM
0
Hi all,
Have been trying to flash new DM800 HD and have had same problems as listed here. The standard repair options don't work when you have no means of rebooting/restarting the box.
With the no ca found, holding button down during power up no longer works.
Using optiflash ver1.8 can repair no ca found, but then what? can't reboot so power off/on back to no ca found. Display after repair shows either "**SERIAL MODE or SETUP**"
Flashing new image OpenPli2.1-beta-dm800-ssl84b etc optiflash works loads flash program then image. Phase 1 completed OK phase 2 "finalizing please wait" hangs at this point.
Other images tried same result.
Is optiflash ver1.8 the correct program or should I be doing someting else.
As always any help appreciated.
Thanks
Have been trying to flash new DM800 HD and have had same problems as listed here. The standard repair options don't work when you have no means of rebooting/restarting the box.
With the no ca found, holding button down during power up no longer works.
Using optiflash ver1.8 can repair no ca found, but then what? can't reboot so power off/on back to no ca found. Display after repair shows either "**SERIAL MODE or SETUP**"
Flashing new image OpenPli2.1-beta-dm800-ssl84b etc optiflash works loads flash program then image. Phase 1 completed OK phase 2 "finalizing please wait" hangs at this point.
Other images tried same result.
Is optiflash ver1.8 the correct program or should I be doing someting else.
As always any help appreciated.
Thanks
0
I had already explained to you how to use optiflash here
And see this thread and put here the result
P.s: please follow your problem do not leave more than a month and then return back.
And see this thread and put here the result
P.s: please follow your problem do not leave more than a month and then return back.
Browsing: 1 Guest(s)