[billo75]

0

Hi Yassinov, hope you can help, Ive got a DM800hd, sim2.10, Ihad the "no ca" problem and the error problem, I got Optiflasher to flash, it does everything and at the finish I get this,

"DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: nemesis-2.3-svn91-dm800hd-sim2.1-by-power-sat.nfi
FSize: 61297696 bytes
Authorization id: 36B5394F
Flashing IMAGE Phase1...
Finalizing Job Phase2...Please Wait.."

I have done it a couple of times with the same result, How long do you usually wait on Phase2
The box was working ok, I was using a OpenPli Sim 2.01 Image and this sim card is 2.10 would that be the difference, I put a USB stick in and it has not worked since

Thanks
Billo75

[billo75]

0

SIM2.10 tested with DM800se & DM500hd but not tested with DM800hd for me , i need to make a small test with you online to check that !
Check your PM for details !

Thanks a lot, I will be in touch

Billo

[billo75]

0

SIM2.10 tested with DM800se & DM500hd but not tested with DM800hd for me , i need to make a small test with you online to check that !
Check your PM for details !

Thanks for all the time Yassinov, did not work he has had the box back and is sending for a 2.01 sim, when you get these new simcards do you just put a new image on or do they come with the image installed, never put a new one in before.
Cheers
John (billo75)

[tassos]

0

Dear Yassinov Hi can you tell me if the Optiflasher can be used with the Dreambox 500s? If Yes can you recomend a good Image. Thanks, looking forward to your reply,tassos

[iqbalrajput]

0

Hi Yassinov
Ive got a DM800hd clone, sim2.10, it has no separate sim card. I had the "no ca" problem and the error problem, I got Optiflasher to flash. I used Dream Elite image for clone 800HD which has worked fine on this receiver.
It does everything and at the finish I get this,
Finalizing Job Phase2...Please Wait.."
I have done it a couple of times with the same result, How long do you usually wait on Phase2
The box was working ok, I was using the above image and when i flashed another image it ended up into 'no CA error'.
Thanks

[ahmed]

0

Hi Yassinov, hope you can help, Ive got a DM800hd

DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: OpenPLi-2.1-beta-dm800-20120516.nfi
FSize: 45221152 bytes
Authorization id: 75CB79E4
Flashing IMAGE Phase1...
Finalizing Job Phase2...Please Wait...

[ahmed]

0

Hi Yassinov, hope you can help, Ive got a DM800hd

DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: OpenPLi-2.1-beta-dm800-20120516.nfi
FSize: 45221152 bytes
Authorization id: 75CB79E4
Flashing IMAGE Phase1...
Finalizing Job Phase2...Please Wait...

Please before post next time provide us with full details about your box if clone or genuine & sim type!

clone sim 2.01

[fairbird]

0

Exactly what is the problem you have got? does not flashed image probable or some thing else? please put full details for problem as yassinov mentioned..

And please have a look here "How to optiflash use"
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[ahmed]

0

Ive got a DM800hd, sim2.01, Ihad the error problem, I got Optiflasher to flash, it does everything and at the finish I get this,

DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: OpenPLi-2.1-beta-dm800-20120516.nfi
FSize: 45221152 bytes
Authorization id: 75CB79E4
Flashing IMAGE Phase1...
Finalizing Job Phase2...Please Wait...

---

l did like this .http://www.yassinov.com/forum/showthread.php?tid=563

[fairbird]

0

Please ahmed, help us to get help.. what is your problem? you just said i did this. What after what you did?
Please explain your problem.
If you can not explain by English, No problem with arabic. Make new topic and explain your problems.