0
DM800 HD se clone
sim2.10
Tool set to use sim2.10-ssl84a
Tool:
Power ON DB Device [ESC to Abort]
Operation Start at: 10:16:39
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait... (here the tool hangs)
Box:
Displays IP address 192.168.1.77 *** Serial Setup
Displays /flash/vmlinux.g/
Displays "Dream Multimedia" and the yellow bar.
Shuts down.
The repair tool hangs at "Finalizing Job Phase2...Please Wait...
Power off the DM800 HD se and it boots with a "2nd failed!" message in the display and a fast flashing blue LED
Restart the box and it displays "2nd failed!"
sim2.10
Tool set to use sim2.10-ssl84a
Tool:
Power ON DB Device [ESC to Abort]
Operation Start at: 10:16:39
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait... (here the tool hangs)
Box:
Displays IP address 192.168.1.77 *** Serial Setup
Displays /flash/vmlinux.g/
Displays "Dream Multimedia" and the yellow bar.
Shuts down.
The repair tool hangs at "Finalizing Job Phase2...Please Wait...
Power off the DM800 HD se and it boots with a "2nd failed!" message in the display and a fast flashing blue LED
Restart the box and it displays "2nd failed!"