0
Hi there,
i have a "made in china" dreambox 800 HD clone.
it has a Ferrari sim card inside.
i had nemesis somewhat installed before.
from one day to another (after a hangup and cold reset) it only shows:
"Dream Multimedia -> Error!" few seconds after i connect the power to the box.
the last days i have read a lot in forums and tried a lot of different stuff to fix it.
dreamup patchted by forhike and natas only led to no CA found errors.
---
lastly i found OptiFlasher Ultimate Pro 2.0.0.9...
i flashed the box according and exactly after the thread described by fairbird "flash using only nullmodem cable"...
and i chose the latest ferrari ssl 88f to it.
after phase 2 comes:
"Dreambox flashed successfully!"
then i switched to the webinterface.
device info shows the following:
Information Product Name ???
Booloader version Dreambox Second Stage Loader BUILD #65,
built 20080927
Flash Size 64 MB
Production Date (YYYY/MM/DD) N/A
mID ?
Serial Number ?
MAC Address ?
Printed Serial Number ?
then i tried to flash firmware (i think i can flash images here, is that right??) (strangely that function only worked with IE and not with chrome or firefox) with three different new images specially pachted for a dm800 clone:
(OpenXTA-4.0_Ferrari-SSL88F_DM800_20141015_RAED, Open-Death_Ferrari-SSL88F_dm800_20141002_RAED and BlackHole-2.1.3_Ferrari-SSL88F_dm800_20141113_RAED_V2).
it takes a bit of time to flash over nullmodem, but after 2 minutes or so it says: "finished 100%".
then i pulled the power and reconnected the power ( i think that is the appropriate reset method now?) and expected it to boot up normally...
BUT:
only the "Dream Multimedia -> Error!" message came up after a few seconds again...
Im LOST and frustrated.
What am i missing or what am i doing wrong?
thanks for any help guys!
i have a "made in china" dreambox 800 HD clone.
it has a Ferrari sim card inside.
i had nemesis somewhat installed before.
from one day to another (after a hangup and cold reset) it only shows:
"Dream Multimedia -> Error!" few seconds after i connect the power to the box.
the last days i have read a lot in forums and tried a lot of different stuff to fix it.
dreamup patchted by forhike and natas only led to no CA found errors.
---
lastly i found OptiFlasher Ultimate Pro 2.0.0.9...
i flashed the box according and exactly after the thread described by fairbird "flash using only nullmodem cable"...
and i chose the latest ferrari ssl 88f to it.
after phase 2 comes:
"Dreambox flashed successfully!"
then i switched to the webinterface.
device info shows the following:
Information Product Name ???
Booloader version Dreambox Second Stage Loader BUILD #65,
built 20080927
Flash Size 64 MB
Production Date (YYYY/MM/DD) N/A
mID ?
Serial Number ?
MAC Address ?
Printed Serial Number ?
then i tried to flash firmware (i think i can flash images here, is that right??) (strangely that function only worked with IE and not with chrome or firefox) with three different new images specially pachted for a dm800 clone:
(OpenXTA-4.0_Ferrari-SSL88F_DM800_20141015_RAED, Open-Death_Ferrari-SSL88F_dm800_20141002_RAED and BlackHole-2.1.3_Ferrari-SSL88F_dm800_20141113_RAED_V2).
it takes a bit of time to flash over nullmodem, but after 2 minutes or so it says: "finished 100%".
then i pulled the power and reconnected the power ( i think that is the appropriate reset method now?) and expected it to boot up normally...
BUT:
only the "Dream Multimedia -> Error!" message came up after a few seconds again...
Im LOST and frustrated.
What am i missing or what am i doing wrong?
thanks for any help guys!