[kostasbmw]

0

dreeambox 800hd se sim2 clone

during flasing an image i had power failure in my place

so i had to disconnect and tried to do it again

the problem is that the software detects 192.168.0.53 port and communicates perfect

but the dreambox shows 192.168.0.50 in stop mode

so i cannot flash any image

any ideas what to do???

[fairbird]

0

Make your DHCP = Yes in your box and try to flash your box again..
menu
setup
system
network
adapter settings
DHCP = Yes

Then use optiflasher again ...If problem still happen then follow ([Reset Bios Factory Settings Found]) method and try again to flash image
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[kostasbmw]

0

dhcp method dont work

trying the reset bios

seems ok trying again to flash

everything flashed succesfully



thanks for your help