0
Hi dm800 Sim 201 "ca not found". IP 192.168.1.77 periodic interface that shows the dm800 was built 20090217.Second stage loader # 59 from 20080509.Nan images from Dreambox Optiflasher Pro v2009 Ultimate; loaded but will not Reboot After Done
DreamUP_patched_by_forhike_and_natas with Nemesis2-6-dm800-SVN-108r4-ramiMAHER onely serial Uploading file to box...
box is flashing from its memory...
OK, flash-copy succeeded
The same result by use of network+serial
Still Sim201 team #84B.Error NO CA FOUNG
Is there a solution?
Regards bjorntg
Thereafter
Hi Used sim201_ssl84D
DreamBox-OptiFlasher-Pro-Ultimate-E2-v2.0.0.9
TSimage-3.0-OE-2.0-SIM2-DM800-SSL84D-20140608-HOUARAHi Used
No rebooting
Then DreamUP_patched_by_forhike_and_natas
21:53:06 box type: DM800
21:53:06 Enabled recovery of bad sectors
21:56:14 Calculating checksum...
waiting for OK from box to beginn upload...
21:56:15 Uploading file to box...21:56:30 box is flashing from its memory...
21:56:30 Log: +++ 015 bad sector recovery enabled
21:56:31 OK, flash-copy succeeded (sim201_ssl84D)
21:57:11 Calculating checksum...
waiting for OK from box to beginn upload...
21:57:13 Uploading file to box
00:01:19 box is flashing from its memory...
But nothing happen
The same CA NOT FOUND
What now ?
Regards bjorntg
DreamUP_patched_by_forhike_and_natas with Nemesis2-6-dm800-SVN-108r4-ramiMAHER onely serial Uploading file to box...
box is flashing from its memory...
OK, flash-copy succeeded
The same result by use of network+serial
Still Sim201 team #84B.Error NO CA FOUNG
Is there a solution?
Regards bjorntg
Thereafter
Hi Used sim201_ssl84D
DreamBox-OptiFlasher-Pro-Ultimate-E2-v2.0.0.9
TSimage-3.0-OE-2.0-SIM2-DM800-SSL84D-20140608-HOUARAHi Used
No rebooting
Then DreamUP_patched_by_forhike_and_natas
21:53:06 box type: DM800
21:53:06 Enabled recovery of bad sectors
21:56:14 Calculating checksum...
waiting for OK from box to beginn upload...
21:56:15 Uploading file to box...21:56:30 box is flashing from its memory...
21:56:30 Log: +++ 015 bad sector recovery enabled
21:56:31 OK, flash-copy succeeded (sim201_ssl84D)
21:57:11 Calculating checksum...
waiting for OK from box to beginn upload...
21:57:13 Uploading file to box
00:01:19 box is flashing from its memory...
But nothing happen
The same CA NOT FOUND
What now ?
Regards bjorntg