03-06-2013, 10:29 AM
0
Please install correct images to ES800 se,otherwise the box can’t boot up properly.For example,you should install estar images to ES800 se with estar SIM card. DO NOT install estar images to ES800 se with other SIM cards,or install other images to ES800 se with estar SIM card!
If you install a wrong image to the box,the OLED will display --R01:NO CA FOUND
This tutorial will tell you how to rescue the box.
1. Download estar-DreamUP1337 and cp2012 driver from estar website,setup the driver.
2. Connect minuUSB to your PC,connect ethernet port to internet (DHCP).
3. Open estar-DreamUP1337,setup correct com port,don’t seclect Use Network,click connect then power-on
4. Click Disconnect button ,find box’s IP on OLED,select Use Network and setup correct IP,then power-off.
5. Click connect button and power-on,now you can flash correct estar images.
If you install a wrong image to the box,the OLED will display --R01:NO CA FOUND
This tutorial will tell you how to rescue the box.
1. Download estar-DreamUP1337 and cp2012 driver from estar website,setup the driver.
2. Connect minuUSB to your PC,connect ethernet port to internet (DHCP).
3. Open estar-DreamUP1337,setup correct com port,don’t seclect Use Network,click connect then power-on
4. Click Disconnect button ,find box’s IP on OLED,select Use Network and setup correct IP,then power-off.
5. Click connect button and power-on,now you can flash correct estar images.