11-06-2013, 08:02 PM
0
seems like my dm800hd se is bricked or something been trying now for 2days to fix it.
Its a8p simcard.
ive tried sunray/dreamup some repair tools but nothing
this is what happend or doesent happens in optiflash.
nothing happens when i try to flash with the optiflash, (using only nollmodem)
it seems i cant even fix bootloader no nothing
after i press flash it just says enter ip number in front of the box, but i doesent get any ip number. it still just says err1 noca found.
ive used hyperterminal now and this is what i get.
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800SE
FIRST STAGE 1.0/400 {BO23456}
2ND STAGE OK, build #82 (2011-02-25)
0.000 - BCM board setup
0.000 - fp init
0.000 - ca init
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
CA invalid
OLED found!
color oled reset
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND
0.608 oled: string too long: '* ERR01: NO CA FOUND'
¨
anything suspicious? :S
Its a8p simcard.
ive tried sunray/dreamup some repair tools but nothing
this is what happend or doesent happens in optiflash.
nothing happens when i try to flash with the optiflash, (using only nollmodem)
it seems i cant even fix bootloader no nothing
after i press flash it just says enter ip number in front of the box, but i doesent get any ip number. it still just says err1 noca found.
ive used hyperterminal now and this is what i get.
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800SE
FIRST STAGE 1.0/400 {BO23456}
2ND STAGE OK, build #82 (2011-02-25)
0.000 - BCM board setup
0.000 - fp init
0.000 - ca init
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
CA invalid
OLED found!
color oled reset
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND
0.608 oled: string too long: '* ERR01: NO CA FOUND'
¨
anything suspicious? :S