[pop3happy]

0

New : Estar800/Estar800se RCU with Learning Capability
1 Function Mode
1) DVB Mode: In this mode, the remote control can control your box.
2) TV Mode: In this mode, the remote control can control your TV set.

2 Mode Switches
1) Press the “DVB” button once, and the “DVB” button will flash once. Then the remote control will switch to DVB Mode.
2) Press the “TV” button once, and the “TV” button will flash once. Then the remote control will switch to TV Mode.

3 Learn IR Commands
This learning remote control can learn commands from any other TV remote controls. So you can conveniently control both your box and TV set with the remote control. Please follow the steps to learn commands:
1) Direct the learning remote control and teaching remote control head-to-head.
2) Press the “TV” button of the learning remote control for 3 seconds until the “TV” button illuminates red. Then release the “TV” button.
3) Press a button to be programmed, the “TV” button will flash.
4) Press a button to be learned of the teaching remote control until the “TV” button flashes three times rapidly. Release the button.
5) To learn other buttons, repeat step 3 & 4.
6) To end, press the “TV” button and it will turn off. All learned commands will be saved.