[orlando123]

0

Hello I have a 800hd se its not a clone I swap out the original sim for the Japhar NC3/SUPERSIM3 the Japhar sim was working great but then I went back into the box to fix the sim holder as one side was broken I only change the top part of the sim holder not the part that's solder in but after putting the box back I am now having 2ed failed ? I am not sure which options I need in OptiFlasher to fix this problem as there no Japhar sim option in the Repair (No CA Found) mode can any one help please

[orlando123]

0

Hi Yassinov thank you for that i founf those settings in the new ver3 OptiFlasher, and i did the LD5 as per your advice all went well to the point after flashing last text in OptiFlasher screen (( Please Wait! do not disconnect until done/reboot! Dreambox Flashed Successfully ))) I waited for about 5 mins and the box never rebooted and when i restarted the box to see if it had worked i got the same 2ED Failed. what could be the problem that the box is not rebooting after the flash ?


PS i just did the Repair (No Ca Found) with log monitor on and this is what i got ((( Dreambox D

FIRST STAGE 1.0/400 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #82 (20100722)