0
Hi, My name is Mike and I was wondering if someone could help me?
I have the NO CA FOUND error on my DM800HD SE Clone (I think)
I have tried to upload as many photos to explain what I have already tried and where I am getting to...
I'll start off with a bit about what I know about my box...
Front of Box
Rear of Box
On starting up I get this message
If I hold the mini flashup button when powering on I get this
and then this
and then this
I have then tried to flash via web browser by typing in IP address 192.168.1.114 ...I have tried to flash new bootloaders from 76 to 84a/b/d etc. and also new images but when I restart it has no effect.
If I click on device info within web browser Ip address I get this info
So, I have since installed optiflasher pro and tried the following, Connected via USB only, write image, write bootloader, repair no CA Found tool. All seem to be successful when installing but when re-starting box still get NO CA FOUND....
Connected via USB and LAN and I get the following IP ADDRESS SHOWN...
I have tried several images and bootloaders again but have no luck...
I have also tried writing image with 192.168.1.114 in optiflasher with no luck
If I connect via LAN and USB and try to write image I get this...But on the box only shows NO CA FOUND again...
The most life I've had out of the box is by using NCF tool where I have had the fan up and running and with what seems like a successful flash...
I've even had the clock showing and sleep timer menu so thought I had solved the problem, only to find NO CA again when restarting the box...
Any help would be appreciated,
Thanks,
Mike.
I have the NO CA FOUND error on my DM800HD SE Clone (I think)
I have tried to upload as many photos to explain what I have already tried and where I am getting to...
I'll start off with a bit about what I know about my box...
Front of Box
Rear of Box
On starting up I get this message
If I hold the mini flashup button when powering on I get this
and then this
and then this
I have then tried to flash via web browser by typing in IP address 192.168.1.114 ...I have tried to flash new bootloaders from 76 to 84a/b/d etc. and also new images but when I restart it has no effect.
If I click on device info within web browser Ip address I get this info
So, I have since installed optiflasher pro and tried the following, Connected via USB only, write image, write bootloader, repair no CA Found tool. All seem to be successful when installing but when re-starting box still get NO CA FOUND....
Connected via USB and LAN and I get the following IP ADDRESS SHOWN...
I have tried several images and bootloaders again but have no luck...
I have also tried writing image with 192.168.1.114 in optiflasher with no luck
If I connect via LAN and USB and try to write image I get this...But on the box only shows NO CA FOUND again...
The most life I've had out of the box is by using NCF tool where I have had the fan up and running and with what seems like a successful flash...
I've even had the clock showing and sleep timer menu so thought I had solved the problem, only to find NO CA again when restarting the box...
Any help would be appreciated,
Thanks,
Mike.