[dreamphil]

0

Hello,
I have a dreambox 800 HD PVR Clone
SIM 2.01
BootLoader 76
It worked perfectly with the image and boot ICVS GP3 76D. I wanted to flash with a more recent and since I have NO CA FOUND error ERR01. So I bought Optiflasher and did a test with Hyperterminal as follows.
FIRST STAGE 1.00 {} BO23456

2ND STAGE OK, build # 76 (20100419)

0.000 - BCM board setup
{} 00000126,00000126,00000125,00000124,00000123,00000133
0007 - fp init
0008 - ca init

© 2007.2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {} BO23456

2ND STAGE OK, build # 76 (20100419)

0.000 - BCM board setup
{} 00000126,00000126,00000125,00000124,00000123,00000133
0007 - fp init
0008 - ca init
invalid CA
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND
I read the various posts on this subject and I have tried all possible configuration LD1 and advanced mode 2 and all choices offer. I tried several cable and even made ​​a crossover cable. But I still have the same answer
Device Power ON DB [ESC to Abort]
DM800HD Detected!
Wrong Response Boot!
I also removed the sim and I cleaned and reset and still the same. I unfortunately have no other PC to test. I do not know what to try to revive it.
If you have an idea of what I could thank you in advance.
Good day.

[fairbird]

0

What is win that you are using? 7 or xp?

[dreamphil]

0

It has been over 10 days I'm trying to 24 hours interval but it changes nothing. I use seven and I try with windows XP mode and it is always the same.
Again thank you for your help.
Dreamphil.

[fairbird]

0

Try to flash this bootloader from attach and use "Flashing by Null modem cable only without Network lan" method..and if you get any problem message from optiflasher take picture from optiflasher and uploade it here..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

P.s: Make sure null cable work well because you can not fix "NO CA FOUND" with out null cable.

[dreamphil]

0

Here is how I proceed






Whatever the choice, I immediately answer this and I can not inject or bootloader image. For cable, I made ​​one with 2 ---> 3 3 ---> 2 5 ---> 5. I hope I do the right thing and thank you for your help.
Dreamphil

[fairbird]

0

"Wrong Boot Response" came by two reasons:
1-Sim was not the same with bootlader.
2-Null modem cable does not worked probable.
Have a look here
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[dreamphil]

0

Hello,
I read the post and mentioned that make the cable as shown. Unfortunately the answer is always the same.
I'll try to find someone who has a PC with a COM port to try.
thank you
Dreamphil

[dreamphil]

0

Hello, as I returned to work today I decided to emener my box with me and connect it to my computer in my office. I was stick on a usb and when I started, it has operated immediately. The problem was therefore boot my PC because the past is no pobleme.
I want to thank you for the time you have devoted myself so I can consider ending the post.
Good day to all.

[fairbird]

0

Closed Under Solved