+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: General (https://www.yassinov.com/forum/forumdisplay.php?fid=21)
+--- Forum: Off Topic Zone / General Discussion (https://www.yassinov.com/forum/forumdisplay.php?fid=22)
+--- Thread: [SOLVED] DM800 "partition 3 full or corrupt" error (/showthread.php?tid=951)
DM800 "partition 3 full or corrupt" error - dishboy - 07-08-2012
My clone box has been causing me some issues for a while now. I am unable load up an image to entirety, it fails on install about 1/3 way with an error of partition 3 corrupt or full.
I ran dreamup to repair the sectors and it did find a sector with a problem but the best I can do is upload and then it fails during flash install.
I tried to telnet but no OS to run telnet on box.
I am only able to connect to the box in http stop mode. Is there a rescue method to boot from USB or something else? This has nothing to do with second stage boot loader/no CA found. too much data (or bad sectors) in partition 3 (end: 04000000, pos: 04000000)
RE: DM800 "partition 3 full or corrupt" error - fairbird - 07-08-2012
Have you tried with Optiflasher "Fix Bad Sector "Sectors Recovery" method
RE: DM800 "partition 3 full or corrupt" error - dishboy - 07-08-2012
I ran optiflasher for the first time and it only creates two small files in the folder. No menu pops up to allow me to do anything. I am on Windows 7 32bit.
I must of downloaded the Beta version...I have v1.0.2 running now. Thanks.
RE: DM800 "partition 3 full or corrupt" error - fairbird - 07-09-2012
I use optiflasher 1.0.9a last version on win7 working well, run it under Administrator..
RE: DM800 "partition 3 full or corrupt" error - dishboy - 07-10-2012
Optiflasher is not visible on my home Windows 7 Ultimate, works on my XP professional and Windows 7 Professional. I eventually recovered the bad sector and my dm800 running again.
RE: DM800 "partition 3 full or corrupt" error - fairbird - 07-11-2012
So.. you solved your problem..
Glad to here that...
Closed under SOLVED..