@@OpenPLI-4.0-+Gstreamer+1.7.1_Ferrari-SSl88F_DM800_20160106@@

Code:
Changes since previous release:



- Gstreamer snapshot updated to 1.7.1:

  * The mp4 issue when playing from remote locations has been fixed upstream, 

    so I've dropped the revert.

  * Libsoup has been updated so I've dropped the revert for the 

    old libsoup as well.

- DM800Se V2 and DM500HD V2 kernel config has been 

  cleaned and more in sync with PLi's config for the other Dreambox models.

- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.

  * This should give us a few more MBs to work with (Dreambox *cough*).

- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.

  * Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.



  * Enable of the zram module.

  * Shipping his wifi drivers.

  * VFD time is now synced every 5 minutes using a cron job.

  * Software update and plugin-installation has been fixed.

  * Using Tapaat's lirc config for spark and spark7162.

- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:

  * A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.

- Libsoup has been updated to 2.52 (from master-next).

- Refactor wifi drivers a bit on Linux 2.6.18, 

  not auto-loading the mt7600 anymore, 

  the correct driver should hopefully be loaded 

  when you plugin your wifi stick.



Changes compared to openpli-oe-core gst-1:



- Ships with gstreamer upstream master git:

  Using the same patches as openpli-oe-core gst-1 with only these changes:

  Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch

  because this patch was already checked in upstream.

- Every receiver uses christophecvr's multibox dvbmediasink.



- Libsoup has been updated to 2.52 (from master-next).

- Using libtrmp and rtmpdump from oe-alliance.

- Some small enigma2 patches for Dreambox receivers 

  (ac3/dts bypass and blanking on zap support).

  These are only applied for Dreambox receivers.

- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).

- IPTV Player from samsamsam included (thx to Athoik for the recipe).

- Large list of public IPTV streams included thanks to the Japhar Team.

- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.

- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:

  added si2166b blindscan support.

- Using aio-grab source from oe-alliance which includes fixes for spark receivers.



Known issues:



- DM800 first boot will take a while, please be patient. The next boot will be faster.

- On spark/spark7162 you need to set 'boxtype  =  dreambox' for oscam dvbapi.

  Please use 'duckbox' instead.

- On Zgemma Star you cannot use full HD skins.

  This is a hardware/driver limitation.

  Please don't try it, it will crash enigma2.

- Some Dreambox remotes may behave very sensitive.

  This causes button presses to register multiple times instead of just once.

  As a workaround you can adjust the key interval:

  Go to: Menu - System - Input devices - dreambox remote control (native).

  Set "Change repeat and delay settings" to yes

  Set "Interval between keys when repeating:" to 200ms or 300ms.

  Press green button (OK)

  Now set the same delay for: "dreambox advanced remote control (native)" as well.



TODO:



- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to

load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.



- Linux 2.6.18: Look into the v4l usb drivers.

- Add Spark specific plugins by gorski.

- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.