+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: [SOLVED] No flash on DM800 (/showthread.php?tid=2392)
Pages:
1
2
No flash on DM800 - superscipion - 01-16-2014
Hi Fairbird,
Back with a new problem
router with DHCP on 192.168.1.1
PC on 192.168.1.3
DM800 HD PVR provides 192.168.1.2
I use Optiflasher (of course) with serial cable DB9 for bootloader you provided: everything goes well (see pict 1)
I flash the image with lan only: everything goes well (see pict2)
As soon as I reboot the display of the DM gives "Error" (and only that, not the standard "no CA found")
[attachment=587][attachment=588]
Any idea?
Thanks in advance
RE: No flash on DM600 - superscipion - 01-16-2014
Forgot to say that the ssl provided by you is ssl84D
RE: No flash on DM600 - fairbird - 01-16-2014
DM800 or DM600 .... You was wrote DM600
RE: No flash on DM600 - superscipion - 01-16-2014
Hi fairbird
I said it was the version of the ssl YOU provided to me (in my former topic concerning my "No CA" question
Sorry for the typing fault: I am writing about a DM800 HD PVR
RE: No flash on DM800 - fairbird - 01-16-2014
Exactly what is the error message on front panel screen?
Dream multimedia >>error!
only
Or (No Ca Found)
RE: No flash on DM800 - superscipion - 01-16-2014
During flash:
Sim201 team
192.168.1.2
*** STOP ***
After flash successful:
Dream
Multimedia
-> error!
look at
* ERROR: NO CA FOUND
RE: No flash on DM800 - fairbird - 01-16-2014
What image your was flashed and get No Ca Found? Original image or Patched image (I think you was flashed wrong image)
Your sim is Sim2 So must be flash patched image for Sim2 not original or another patched image for another sim
Go to images section you will find image for your sim
RE: No flash on DM800 - superscipion - 01-17-2014
This are the ones I tried (all with the same result):
newnigma2-stable-dm800-v4.0.3.nfi
release-dm800-3.2.4.nfi
OoZooN-Image-dm800-3.2.2.nfi
Merlin-3_OE-1.6-final-dm800-20120515.nfi
Merlin-3_OE-2.0-drhg_SIM2_ssl84D_dm800_18-12-2013.nfi
Makes a lot: most of them coming from Aki's blog
Thanks for your support
RE: No flash on DM800 - fairbird - 01-17-2014
All images what have you tried original images...
only
Merlin-3_OE-2.0-drhg_SIM2_ssl84D_dm800_18-12-2013.nfi
As i said before don't (never) flash original image your box clone not Genuine
-So your solved topic and fix your box
-After fix it just flash patched image for Sim2
here you can find images for your sim
And about bootloader just once to flash it to box then you don't need it to flash it again...
RE: No flash on DM800 - superscipion - 01-17-2014
Hi fairbird,
We go further but it is not yet solved
Using Optiflaher, as usually:
I flashed Ssl84D : successful (with DB9)
I flashed the image: successful (with Lan only)
When loading, box is connected to my monitor (scart plug, no lan, no satellite input signal cable)
I have:
Power button blinking (red)
On the LCD display:
Sim201 Team
Then Booting
On the TV: Merlin picture
Then same with wheels
Power button turns off
On The TV: nothing
On the LCD display: DVI followed by Scart followed by YPbPr
Everything is blocked and I need to unplug
Restarting brings back to the same situation
Did I do something wrong?
The two images I used were downloaded from the link you provided and are from the files
Merlin-3-dm800-04-07-ramiMAHER.rar
newnigma2-dm800-v3-3-2-ramiMAHER