+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: Estar V3 (/showthread.php?tid=1923)
Estar V3 - Brummie - 08-21-2013
Hi my mate had a NO CA ERROR on his DM800se estar V3 sim, i have flashed this image Estar_OpenBlackHole_ES800se_yassinov and its got it back to life, if i try to flash any other image i get this message through web browser in the progress bar i get CRC check skipped.
INVALID IMAGE (OR OLD VERSION)
then i tried through dreamup 137 from the estar site i can flash #84 then when i try to flash an image i get that message.
i want to install dreamelite image
this is the message from dreamup 1.3.3.7
13:36:08 box type: DM800SE
13:36:36 Calculating checksum...
13:36:36 Uploading file to box...
13:36:36 box is flashing from its memory...
13:36:37 OK, flash-copy succeeded
13:36:54 Calculating checksum...
13:36:55 Uploading file to box...
13:37:17 box is flashing from its memory...
13:37:19 Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
RE: Estar V3 - fairbird - 08-21-2013
If you get this error message { INVALID IMAGE (OR OLD VERSION) }
So, should be to flash first last bootloader for your sim then close box after that flash new image ...
RE: Estar V3 - Brummie - 08-28-2013
no this does not work if i flash an #82 or #84 first switch off then switch back on and when i try to install any other image i get this error Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
the only image i can flash is Estar_OpenBlackHole_ES800se_yassinov but this keeps getting a green screen and going into a boot loop
the sim is e-star SIM V3 DM800se
RE: Estar V3 - fairbird - 08-28-2013
So, try to flash any new image by using fix bad sectors by using optiflasher
or by dreamup for e-star...
RE: Estar V3 - Brummie - 08-28-2013
same problem
19:37:29 box type: DM800SE
19:37:29 Enabled recovery of bad sectors
19:38:00 Calculating checksum...
19:38:00 Uploading file to box...
19:38:18 box is flashing from its memory...
19:38:20 Log: +++ 015 bad sector recovery enabled
19:38:20 Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
that was with this image downloaded from estar site
estar-dm800se-nemesis2.6.nfi
RE: Estar V3 - fairbird - 08-29-2013
1-Flash bootloader 82 by bad sector recovery
2-Again flash last bootloader by bad sector recovery
3-Try to flash new image...if still issue then ask the E-star supported here
RE: Estar V3 - Brummie - 08-29-2013
09:30:02 box type: DM800SE
09:30:02 Enabled recovery of bad sectors
09:30:16 Calculating checksum...
09:30:16 Uploading file to box...
09:30:16 box is flashing from its memory...
09:30:17 Log: +++ 015 bad sector recovery enabled
09:30:17 OK, flash-copy succeeded
Flashed #82
09:30:47 box type: DM800SE
09:30:47 Enabled recovery of bad sectors
09:31:02 Calculating checksum...
09:31:02 Uploading file to box...
09:31:02 box is flashing from its memory...
09:31:03 Log: +++ 015 bad sector recovery enabled
09:31:03 OK, flash-copy succeeded
Flashed #84
09:31:40 box type: DM800SE
09:31:54 Enabled recovery of bad sectors
09:32:12 Calculating checksum...
09:32:13 Uploading file to box...
09:32:31 box is flashing from its memory...
09:32:33 Log: +++ 015 bad sector recovery enabled
09:32:33 Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
tried to flash estar-dm800se-nemesis2.6.nfi after flashing both bootloaders in recover bad sector mode
is it possible to change the sim to an DM800se 2.10 i have a spare one.will it work with the hardware.
RE: Estar V3 - fairbird - 08-29-2013
Yes you can change the sim, but should be for your box not for another type Sim 800se for 800se box and sim800hd for 800hd box, And not the other way around...
But if you want to change the sim for another Team for example you want change sim e-star to Ferrari do this steps:
1-Don't change sim now leave it on box.
2-Flash new image for new sim (Ferrari image)
3-Turn off power
4-Now change sim.
5-Turn power on.
RE: Estar V3 - Brummie - 08-29-2013
cannot flash any other image to it except Estar_OpenBlackHole_ES800se_yassinov,what ever image i try i just keep getting Flashing failed (!!! 010 INVALID IMAGE (OR OLD VERSION)), box will be unusable now!!
so i wont even be able to flash an DM800se sim 2.10 image, it s impossible
RE: Estar V3 - fairbird - 08-29-2013
no not possible to flash another image team in your box...Try to contact e-star support better ...