+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: Bios No CA FOUND (/showthread.php?tid=1413)
Pages:
1
2
Bios No CA FOUND - boxi - 02-16-2013
-DM800se
-Clone (HIG 024 Rev:D6)
-SIM2.10 (12120)
###############################
Device & Versions
Devicename: dm800se
Enigma Version: ramiMAHER-experimental
Image Version: Release SVN(093), 14-09-2011
Frontprozessor Version: V1
Webinterface Version: 1.6.8
Tuners
Tuner A: (leer)
Tuner B: (leer)
Network Interface (eth0)
Mac Address: 00:09:34:ba:da:80
DHCP enabled: True
IP: 192.168.1.62
Netmask: 255.255.255.0
Gateway: 192.168.1.1
################################
ncv 2.5 can not install the bootloader.
But the box boots by the flash loader
[attachment=335]
but the process is not completed
when I try to boot again is the known error
when I look is strangely bootloader79 inside ??????
Booloader version: Dreambox Second Stage Loader BUILD #79, built 20101015
[attachment=336]
[attachment=337]
[attachment=338]
RE: Bios No CA FOUND - fairbird - 02-17-2013
-Download last version of Optiflasher 2.0.0.4
-Select port and also select loader LD1 (for sim2)
-Select settings and Advanced mode2
-Select repair [No Ca Found] and choose DM800se-Sim210-ssl84b
-Do job
RE: Bios No CA FOUND - boxi - 02-17-2013
have now tried with LD2 but no success
aha have you changed your contribution
someone has an idea why bootloader 79 fixed
and can not be overwritten?
RE: Bios No CA FOUND - boxi - 02-17-2013
I've tried with 2 different sim
Power ON DB Device [ESC to Abort]
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: sim2_800SE_SSL84B.nfi
FSize: 185392 bytes
Socket Error # 10060
Connection timed out.
RE: Bios No CA FOUND - boxi - 02-21-2013
I have also tried another network, same problem
why bootloader 79 fixed ???
after restart?
if it runs ......
Connection Ok!
============================================================
Dreambox Found in Tv Mode
dm800se
Detected!
DVB-Modules: dreambox-dvb-modules - 2.6.18-7.4-dm800se-20110902-r0-ramiMAHER
SecondStage: dreambox-secondstage - 84-r0
============================================================
and after the reboot is over again ....
struck me is still:
when I click with Opti Flasher Repair [NO CA FOUND]
asks the loader is ip ? in my display still stands: error 1 CA .........
RE: Bios No CA FOUND - fairbird - 02-21-2013
Try to flash new image with SSl84b by optiflasher and Fix bad sectors method ...
RE: Bios No CA FOUND - boxi - 02-21-2013
I tried, but no success.
always the same, 79 is not overwritten
RE: Bios No CA FOUND - fairbird - 02-21-2013
Than try also again with bad sectors to flash old bootloader ssl72 or ssl70 then pug and unplug box if you see change it to old bootloader then repeat method and flash latest SSl84b...
RE: Bios No CA FOUND - spider2 - 06-24-2015
Hi,
I have the same problem. So what can I do with it? Please help.
RE: Bios No CA FOUND - spider2 - 06-24-2015
When I try to "Repair (NO CA FOUND)" after do job detect the box and upload something and after write this: "Boot Success & Ready For Job Process!" and here stop and nothing happening.
Only the box show this ip: 192.168.1.77 and if I switch back normal mode and write in the ip I can connect to the box, but when I try to upload new SSL or image after upload nothing change.
With the SSL write succesfull upload but not working, when I upload the image say it is invalid.
I've no idea what is the problem and how can a solve this.