+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: cant repair no ca found ferrari (/showthread.php?tid=1300)
cant repair no ca found ferrari - chotky - 12-15-2012
hello i have 2 pcs 800SE ferrari sim inside , both are no ca found on the screen ( lcd ) i try to recover this 2 pcs without success
i have this message in the soft :
Power ON DB Device [ESC to Abort]
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: DM800se-SSL87F.nfi
FSize: 143152 bytes
and no work start button still DO JOB not busy !!! if try in normal mode box is flashed but after reboot still R01: no ca found
see attached i have 2 pcs same problem after wrong software i think
RE: cant repair no ca found ferrari - fairbird - 12-15-2012
Try to flash first bootloader by "Fix Bad Sector "Sectors Recovery" method see here how to..
if not successfully try to flash image with bootloader by "Null modem cable only without Network lan" method
RE: cant repair no ca found ferrari - chotky - 12-15-2012
i try but same !! its ferrari sim ok and i have 2 pcs same problem its strange when i upload bootloader or image software dont start working he become in DO job mode not busy mode !!! after this operation dreambox go to http mode see attached i can send the flash like this but no change still no ca found after reboot
RE: cant repair no ca found ferrari - fairbird - 12-15-2012
This picture not all time give it correct information...
You sim color is white or read?
RE: cant repair no ca found ferrari - chotky - 12-16-2012
its ferrari sim red with horse
RE: cant repair no ca found ferrari - fairbird - 12-16-2012
In this case try this:
1-Dwonload Last SSL88F for Ferrari Sim from attach..extract file to get bootloader..
2-Try to flash bootloader by optiflasher using "Null modem cable only without Network lan" method see here
3-unplug box and plug it again and make it on stop mode then use "Flashing by Network lan only" method to flash any image with ferrari booltloader..
4-if you can not stop box on "stop mode" flash image with "Null modem cable only without Network lan" method..
here you can find all image for DM800 Ferrari..
RE: cant repair no ca found ferrari - chotky - 12-16-2012
i test all what u say i have a little experience for repairing i think your software dont repair ferrari problems !!! im sure 1000% that its a software problem because the 2 pcs that i have ( no ca found ) both are bad flashing problem all was working before flash . the person say me that he make a bad flash on them , try to find me solution if possible thx
RE: cant repair no ca found ferrari - fairbird - 12-16-2012
Sorry, you are wrong optiflasher fix all sim , because my sim is ferrari and with optiflasher fixed all my problem also have a look here all thread for Ferrari box..
other things your information was wrong...in first post you said you have DM800se and in last post you said your sim is red (this is impossible) because as picture shown:
Red sim for DM800
[attachment=298]
Greean sim For DM800se
[attachment=299]
so no way to run sim for DM800 on DM800se doesn't work...As i mentioned before must be now what kind of box and sim you have
RE: cant repair no ca found ferrari - fairbird - 12-28-2012
Closed...Not followed