+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox OptiFlasher Pro [Basic EDition] (https://www.yassinov.com/forum/forumdisplay.php?fid=35)
+--- Thread: sunray4 usb flash - no LAN - not working - sim 2.10 (/showthread.php?tid=1198)
sunray4 usb flash - no LAN - not working - sim 2.10 - manufact - 10-29-2012
I want to flash my sunray4 sim2.10 with USB only because LAN port is broken. It has a mini usb service port on the back. I tried to do it like described
why does optiflasher tell me to connect RG45 (RJ45?) if I want to flash with usb? <- I ignore this and click ok
![[Image: 86426618.jpg]](http://img836.imageshack.us/img836/4196/86426618.jpg)
it all goes OK until i chose image to install. the optiflasher goes from busy to "do job" mode -> it disconnects :(
![[Image: 30985774.jpg]](http://img685.imageshack.us/img685/8002/30985774.jpg)
I do it like descbribed here in forum
I dont know if I am allowed to post this but just some additional information:
when i try with sunray-flashup i get this information
![[Image: 65186842.jpg]](http://img713.imageshack.us/img713/3033/65186842.jpg)
and some times this:
![[Image: 3xl1i4yqyj8.jpg]](http://www10.pic-upload.de/28.10.12/3xl1i4yqyj8.jpg)
and it stops
If i start box normally I can see on front display following:
1. sim2 &4 logo
2. boot #84a
3. dhcp... flash/vmlinux.gz
and it stops. box doesnt boot!
RE: sunray4 usb flash - no LAN - not working - sim 2.10 - manufact - 10-29-2012
sorry... but what is "OptiFlasher & Click" ?
click??
I did it exactly like that with OptiFlasher:
-Advanced / Settings
-Select User RS232/USB Mode Only [Advanced Mode2]
-Detect your USB Port & Select it if USB Driver installed
-Chose Write IMAGE / Restore Backup
-Do Job
not working, optiflasher suddenly goes from "Busy" to "Do Job" again...
RE: sunray4 usb flash - no LAN - not working - sim 2.10 - fairbird - 10-30-2012
If you follow instruction be carefully and optiflasher doesn't responded then try with another pc and better windows xp and also try another mini usb cable..You have connection problem..
RE: sunray4 usb flash - no LAN - not working - sim 2.10 - manufact - 10-30-2012
Thanks for your response but I did all this already:
I tried 2 win7 pcs, 1 windows vista pc and 1 windows xp pc.
I also changed usb cable already.
I also tried different cp210x drivers.
:(
It already worked with another box so it is pretty sure that the box is the problem but maybe only software problem...
RE: sunray4 usb flash - no LAN - not working - sim 2.10 - fairbird - 10-30-2012
In this case maybe hardware not software problem..if you tried every things and doesn't connected..
RE: sunray4 usb flash - no LAN - not working - sim 2.10 - manufact - 10-30-2012
maybe...but i dont think so.
because box was working. then i flash other image (wrong one) inside enigma2, and since then it doesnt boot up. this means hardware besides LAN port was ok. LAN port was broken since beginning
RE: sunray4 usb flash - no LAN - not working - sim 2.10 - manufact - 11-15-2012
PROBLEM NOT SLOVED
I just want to inform:
if your LAN port is broken flashing with USB cable still doenst work
RE: sunray4 usb flash - no LAN - not working - sim 2.10 - fairbird - 11-15-2012
As i mentioned before...
"No Ca Found" problem only one way to fix it by null cable and you can not fix by lan cable and as i mentioned you have Hard ware problem if you can not connected with null cable...Need technical to see it..
RE: sunray4 usb flash - no LAN - not working - sim 2.10 - fairbird - 12-11-2012
Closed..Not followed thread