+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: DM800SE SIM2.20 V2 - R01: NO CA FOUND - The IP Adress not show on display (/showthread.php?tid=3586)
Pages:
1
2
RE: DM800SE SIM2.20 V2 - R01: NO CA FOUND - The IP Adress not show on display - yald - 05-16-2015
I think this topic is not a same problem.
I can not see failure message.
I was try 3 PC but with win 7, 8, 8.1 - not successfully
Then 3 mini usb cables - not successfully
I try to now install win xp but i think this is not a solution. uart driver is compactibile with win 7.8
I need something special. For expample.. How cann i erase sim..? I think this the solution for this problem. Any experience..? with erase sim?
RE: DM800SE SIM2.20 V2 - R01: NO CA FOUND - The IP Adress not show on display - yald - 07-02-2015
From Putty i cann see just below:
BCM74130011
012
K1
K2
K3
K4
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000005
WC1=FFFFFFEC
RC2=00000018
WC2=00000037
RC3=0000000E
WC3=FFFFFFEA
RC4=0000000E
WC4=00000037
NWC=00000010
RC5=00000005
WC5=00000010
RC6=00000018
WC6=00000010
NRC=0000000E
RW=00000014
WW=0000004E
G=00000000 R=0000000E W=00000010
BL=00000000
RC1=00000002
RC2=00000015
BL=00000001
RC1=00000004
RC2=00000019
BL=00000002
RC1=00000004
RC2=00000013
BL=00000003
RC1=00000005
RC2=00000015
BL=00000004
RC1=00000001
RC2=00000016
BL=00000005
RC1=00000006
RC2=0000001F
BL=00000006
RC1=00000006
RC2=00000019
BL=00000007
RC1=00000007
RC2=0000001F
3
COPY CODE
COMPARE CODE
4567
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800SEv2
FIRST STAGE 1.2/400 {BO23456}
2ND STAGE OK, build #88 (2013-05-01)
0.000 - BCM board setup
0.002 - fp init
0.002 - ca init
cannot read cert(2)
cannot read cert(2)
cannot read cert(2)
cannot read cert(2)
cannot read cert(2)
CA invalid
OLED found!
color oled reset
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND
0.879 oled: string too long: '* ERR01: NO CA FOUND'
Any solutions..? Thanks in Advance.
Export from Putty after pusch mini flash up from bottom site of Dreambox.
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000005
WC1=FFFFFFEB
RC2=00000018
WC2=00000037
RC3=0000000E
WC3=FFFFFFEB
RC4=0000000E
WC4=00000036
NWC=00000010
RC5=00000006
WC5=00000010
RC6=00000018
WC6=00000010
NRC=0000000F
RW=00000013
WW=0000004C
G=00000000 R=0000000F W=00000010
BL=00000000
RC1=00000002
RC2=00000016
BL=00000001
RC1=00000005
RC2=0000001A
BL=00000002
RC1=00000005
RC2=00000013
BL=00000003
RC1=00000005
RC2=00000014
BL=00000004
RC1=00000001
RC2=00000017
BL=00000005
RC1=00000006
RC2=0000001F
BL=00000006
RC1=00000006
RC2=00000019
BL=00000007
RC1=00000007
RC2=0000001F
3
COPY CODE
COMPARE CODE
4567
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800SEv2
FIRST STAGE 1.2/400 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build 87 (2012-11-28)
RE: DM800SE SIM2.20 V2 - R01: NO CA FOUND - The IP Adress not show on display - fairbird - 07-02-2015
I was told you in my previous reply try with XP win ...
See this photo ..
RE: DM800SE SIM2.20 V2 - R01: NO CA FOUND - The IP Adress not show on display - yald - 07-04-2015
(07-02-2015, 09:07 PM)fairbird Wrote:
Does not work with xp. Please read my topics.
Anyone knows how to erase sim..?
RE: DM800SE SIM2.20 V2 - R01: NO CA FOUND - The IP Adress not show on display - fairbird - 07-05-2015
You can not erase sim ...
Just you can program it again with (Card reader) if you have correct card reader and compatible software ..