RE: 800HD PVR Wont start at all after flashing failure - Nudel - 12-07-2014
A user on a Swedish Forum told me that SSL 84D have a tendency to "destroy" boxes.
Is there any truth in what he said?
RE: 800HD PVR Wont start at all after flashing failure - fairbird - 12-07-2014
If that true ... should be all user have sim2 and using SSl84D "destroyed" them boxes ..
;)
RE: 800HD PVR Wont start at all after flashing failure - Nudel - 12-09-2014
The new PSu arrived today.
But no difference.
The screen shows something for 1second.
But then shuts of.
The weird thing is that I have managed to start it 2times.
But when restarted - it is the same.
RE: 800HD PVR Wont start at all after flashing failure - fairbird - 12-09-2014
Again flash your box with
(SUNRAY-FlashUP) Google you will find it ...
Flash old image with SSl84B OE1.6 not new image OE2.0
Flash it (Recovered bad sectors)
After open SUNRAY-FlashUP select
Extras > Recovered bad sectors
and remove a tick from (Use network)
UsE new PSU...
If you get same failure then 99% Hardware issue ...
RE: 800HD PVR Wont start at all after flashing failure - Nudel - 12-10-2014
Hi.
I cant flash it, because I cant connect to it :/
I searched a little on 8a8f8-forum. And found some good info.
I found this picture;
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
I have the readings on pin 1-8
But I dont have the 5V on the pins in the upper right.
The question is why...
RE: 800HD PVR Wont start at all after flashing failure - fairbird - 12-10-2014
About me ... I do not have experience in hardward...
But it is normal because you have sim2 product and that photo was for Ferrari product...
Each company have different hardware ...
RE: 800HD PVR Wont start at all after flashing failure - Nudel - 12-13-2014
All capacitors ordered. And a new lm2599 circuit.
Hopefully that will Do the trick
|