+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: [SOLVED] no ca found (DM800se-Sim 2.10 ) (/showthread.php?tid=1329)
Pages:
1
2
RE: no ca found - fairbird - 01-09-2013
In this case wait Yassinov to give you advice or make some online test..
RE: no ca found - suzy - 01-09-2013
I already try this and once again AVG and all firewall disable without success, try again now same result, I disable some progs also but no success.
I hink i am near a solution.
I just install a usb/serial adaptor on my netbook runing on win 7 starter edition.
I copy optiflasher on a usb key and run on this pc but the licence is not same i have now
AE8A9E-DB468A-146172-FF2D61
is it possible to have a licence for this one, this is my pc and not for distribution
Thanks
RE: no ca found - suzy - 01-09-2013
Sorry, in addition i forget to ask how could I know wish ssl I must take? its a 800dh se sim 2.10 i'ts al I lnow.
RE: no ca found - suzy - 01-10-2013
Im back, Yassimov help me to install Optiflasher but impossible to repair ro1: NO CA FOUND
i follow de procedure,chose serial port, only serial connection, 'repair no ca found' and chose DM800HD SE , DO JOB, nothing append. as wel on pc as on dreambox
Hope my box is not dead.
Or maybe you have a last chance procedure????
RE: no ca found - fairbird - 01-10-2013
Does box connected with optiflasher?
Please follow this thread and use "Flashing by Null modem cable only without Network lan" but don't select write image, select Repair (No Ca Found) and choose ssl84b or a for your sim..
If you get any problem take screen shoot to optiflasher and upload it here..
RE: no ca found - suzy - 01-11-2013
Hi Fairbird,
More than 1 jaar I using Optiflasher. I'm shure what I do.
The Dreambox is connected; I follow the procedure, only com port, select repair no ca found, and chose ssl84b (and other also but always for dm800hd se sim 2.10.
Push do job and switch on the dreambox, but nothing change, aswel on optiflasher as on dreambox
I have no screen shot soft for the moment, with the explaination seems clear.
I try last time today then this box wil be for the trash. I'm tired.
I think a found a solution; i l be back in a few minuts with complete expanation, I think could be usable for other people.
RE: no ca found - suzy - 01-11-2013
After several trial with Optimizer, I try to connect my pc via USB TO MINI USB (many external hard disk have this cable) I'ts recongnized by win 7 and under) or you can find the driver here
for XP SERVER AND WIN 7 take this driver
AN335SW
This become a serial port/
Follow the instruction like for serial connection, and it works fine.
I hope this can help other members also.
Regards
Suzy
RE: no ca found - fairbird - 01-11-2013
So did you solved your problem?
RE: no ca found - suzy - 01-11-2013
Like I saod: it(s working fine with mini usb port on Dreambox.
I put now the latest image from Yasinov