erro1: no ca found - frank087234 - 12-19-2012
I flashed the wrong (orginal) image on my dm800 (clone) sim 2.01
I used opti flash , connecting to com1 usb to serial, but and follw step, but nothing happened when I turn the dm800 ON.
I tested the usb/serial cable on another dm800 , no problem
Please help
RE: erro1: no ca found - frank087234 - 12-19-2012
I followed the steps, but no response from box
"Power ON DB Device [ESC to Abort]"
the device is power ON, but nothing happened, the LCD panel show same error
(12-19-2012, 07:01 PM)YASSINOV Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Run OptiFlasher & Click Advanced
Select your RS232 Port From [Detect Ports]
Selecy Write IMAGE / Restore Backup
Let Settings by default on [Advanced Mode1]
Do Job Please note I flashed dm800 with original balckhole ssl84, then got the error
the boatloader which was working on the device is ssl82
Did I miss up the boatloader??
RE: erro1: no ca found - frank087234 - 12-19-2012
(12-19-2012, 07:18 PM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.OptiFlasher must have a response in all cases of software issue !
if not there's something wrong with comunication or cable !
I have tested the cables on another device, and it was recognised easily by optiflasher.
with faulty device nothing happenes!! any ideas??
RE: erro1: no ca found - fairbird - 12-19-2012
give info from hyper terminal.. see here
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
RE: erro1: no ca found - frank087234 - 12-19-2012
nothing hyperteminal is connected, but Blank Page
RE: erro1: no ca found - fairbird - 12-20-2012
In this case as Yassinov said you have connection problem,
1-Try another pc another windows.
2-Try another cable.
RE: erro1: no ca found - frank087234 - 12-20-2012
ok
I have another Box with Ferrari sim (Broken box got sim2.01), it is working fine. Is there anything else I can try using the working box to test? I tested the cables on it, and the yassinov softawre see the good box, but not the broken one.
RE: erro1: no ca found - frank087234 - 12-20-2012
where is the expert yassin????
RE: erro1: no ca found - fairbird - 12-20-2012
Not clear...
please make it more clear mhat you mean?
Did you change sim Ferrari with sim2.01 or you put sim2.01 in Ferrari box ?
RE: erro1: no ca found - frank087234 - 12-20-2012
I put sim2.01 in Ferrari box ? showed erro1 no ca found
then change Ferrari sim in the sim2 box, showed erro1 no ca found.
|